berita perusahaan tentang 300W Handheld LED UV Curing Lamp for Glue, Ink and Photocatalysis: High Power, Portable Curing Solution

300W of UV Power in One Hand

The CG-SCS-200*20-300A handheld LED UV curing lamp puts 300W of UV output and 3W/cm² intensity into a body an operator can carry between benches, vehicles and job sites. Instant on/off, 0–100% dimming and air cooling make it practical for glue, ink and photocatalysis work wherever the part happens to be.

CG-SCS-200*20-300A: 300W handheld LED UV curing lamp, 200x20mm emitting window

Key Advantages

• Strong power: 300W output, 3W/cm² intensity, fast deep cure of UV glue, ink, varnish and coatings.
• Convenient: lightweight handheld body, 200×20mm window, no warm-up, no cooldown.
• Cool running: air cooled, low substrate temperature, safe for thin films and veneers.
• Adjustable: 0–100% dimming for delicate surfaces, full power for high-fill adhesives.
• Clean and durable: mercury-free, no ozone, 20,000h LED life, CE and RoHS.

Technical Specifications

Air-cooled LED head with quartz lens and aluminium housing

Built for Real Production

A 1000W LED UV source delivers roughly the drying performance of a 6000W mercury lamp, so this 300W handheld unit already covers a wide range of bonding, printing and coating jobs. It runs on AC85–265V, needs no warm-up, and the air-cooled head keeps the workpiece cool enough to handle straight after curing — important for thin films, packaging inks and temperature-sensitive assemblies.

Typical Applications

• UV adhesive and glue curing: glass bonding, touch panel lamination, lens assembly, jewelry and craft repair.
• Printing and packaging: screen printing inks, flexo inks, varnishes, labels and cosmetics packaging.
• Photocatalysis research: stable 395nm UV irradiation for catalyst testing and laboratory work.
• On-site repair and field service: mobile resin repair, automotive refinishing, yacht and composite gelcoat, conveyor and packaging-line maintenance where a fixed tunnel cannot reach.
• Wood coating and furniture finishing: UV lacquer, wood wax oil, panel, edge and on-site floor repair, with low heat that protects veneers and edge banding.

Handheld operation: instant on/off, no warm-up, movable between workstations

Ordering and Next Step

Available from one set at USD 450–500, in a wooden case, delivered in 3–5 working days, with L/C and T/T accepted and OEM/ODM customization of window size, wavelength and branding. Tell us your substrate, adhesive or coating and required line speed, and our engineers will confirm the right configuration — a single evaluation unit lets your team validate results before scaling up.